case cover plug.

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Forum rules
Post Reply
MotoMike
Posts: 487
Joined: Wed Aug 04, 2010 3:40 am

case cover plug.

Postby MotoMike » Sun Aug 14, 2011 3:54 pm

The allen plug on the left case which allows access to the crank end for timing wheel installation. What is the proper size allen for that plug. Mine is brass and stamped Agip. Any tips on breaking it free?

thanks
Mike
Top
kmev
Posts: 91
Joined: Tue Nov 24, 2009 1:55 am
Location: Wisconsin

Re: case cover plug.

Postby kmev » Sun Aug 14, 2011 4:05 pm

14mm. Soak with penetrating oil for awhile, and a little bit of heat from a propane torch (heat the case around the nut) always helps.
Top
MotoMike
Posts: 487
Joined: Wed Aug 04, 2010 3:40 am

Re: case cover plug.

Postby MotoMike » Sun Aug 14, 2011 6:41 pm

Kmev
Thanks, will give it a go.

Mike
Top
Post Reply

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 38 guests