Page 1 of 1
Cush drive
Posted: Sat Aug 21, 2021 11:45 am
by lscart
Hi, is the fitting of the sprocket holder to the hub always tight, is there a method people use to ease the two together?
Lance
Re: Cush drive
Posted: Sat Aug 21, 2021 1:47 pm
by Bob_Matthews
Hi Lance,
Mine just pushes together with a slight interference fit and doesn't take much effort.
You could try a light smear of silicone grease or red rubber grease on the leading edges of the fins in the hub.
Re: Cush drive
Posted: Sun Aug 22, 2021 8:52 am
by lscart
I have tried a light smear of oil and grease to no avail, I keep thinking I have the wrong rubber !
Re: Cush drive
Posted: Sun Aug 22, 2021 12:15 pm
by lscart
image.jpg
I have just looked and I do have the wrong one,
Re: Cush drive
Posted: Sun Aug 22, 2021 4:09 pm
by Eldert
that is a rubber for the early Amadoro hub . the GriMeCa hubs used another rubber .
Eldert