Page 1 of 1
450 parts manual on tech section
Posted: Mon Apr 27, 2020 8:24 am
by graeme
How do I open the parts manual for 450 in the Tech section ?
It's not a pdf
When I try to open it it says something about no Adobe ?
Graeme
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 10:17 am
by Ventodue
I 'see' your problem Graeme
. Here's what I get ... (
http://www.motoscrubs.com/Ducati_450_Gr ... ent_CI.htm)
Blank.jpg
Anything particular you're after? I would offer to scan the whole thing for you, but it's 30 odd pages
.
Btw, it doesn't cover the late 450s, desmo or otherwise. That I have as well, tho' ...
Ciao
Craig
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 12:05 pm
by graeme
Thank you Craig
For now only one thing.
Kick start,
On the shaft outside the case, inside the clutch cover.
Return spring, washer, distance piece (tube) then a “washer.”
Does it say what dimension the washer is ?
I’ll have to make one.
Thank you
Regards
Graeme
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 5:04 pm
by ducwiz
graeme wrote:How do I open the parts manual for 450 in the Tech section ?
It's not a pdf
When I try to open it it says something about no Adobe ?
Graeme
Many of the parts books and manual have gone from thr Motoscrubs tech section, forever. Read this:
http://www.motoscrubs.com/forum/viewtopic.php?f=3&t=2144&p=16230I have a complete catalog for the early 450 models available, and one for the late 450D model, figures of chassis parts only and low resolution. I can send them by email, or place link for download.
Hans
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 5:05 pm
by ducwiz
ducwiz wrote:graeme wrote:How do I open the parts manual for 450 in the Tech section ?
It's not a pdf
When I try to open it it says something about no Adobe ?
Graeme
Many of the parts books and manual have gone from thr Motoscrubs tech section, forever. Read this:
http://www.motoscrubs.com/forum/viewtopic.php?f=3&t=2144&p=16230I have a complete catalog for the early 450 models available, and one for the late 450D model, figures of chassis parts only and low resolution. Both are scanned pdf's. I can send them by email, or place link for download.
Hans
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 5:58 pm
by amartina75
18.5 x 25 x 0.5
Re: 450 parts manual on tech section
Posted: Mon Apr 27, 2020 9:18 pm
by graeme
Gentlemen,
Thank you all once again.
I have a section of the parts manual for 450 but it only has bodywork, wheels and the crankshaft assembly.
Thank you again
Graeme
Re: 450 parts manual on tech section
Posted: Tue Apr 28, 2020 9:00 am
by Ventodue
Thanks to amartina75 for sorting you out. It's good, this forum
.
graeme wrote: I have a section of the parts manual for 450 but it only has bodywork, wheels and the crankshaft assembly.
On this particular point, Graeme, you may have noticed that the kickstarter pages that amartina75 scanned are in fact common to all 3 sizes of engine - i.e for these bits, there's no separate parts manual for the 450.
Re: 450 parts manual on tech section
Posted: Tue Apr 28, 2020 9:15 am
by ducwiz
Comment: The 450 kickstart lever is longer than the others. It has a different part no.
Parts catalogs for download:
https://www.sendspace.com/file/1pcj84https://www.sendspace.com/file/e330g6Hans
Re: 450 parts manual on tech section
Posted: Tue Apr 28, 2020 10:48 am
by Ventodue
ducwiz wrote:Comment: The 450 kickstart lever is longer than the others. It has a different part no.
Hans
True, true, Hans
. Good point - wouldn't want anyone to make the mistake that just because the
parts book pages are common for all 3 models that the parts that are shown there are too!