Motoscrubs.com

Somebody got new fork tubes! Now, for the life of me I can't remember which way the dampener assembly goes in. Do the pictures below look like the correct order and orientation?





Thanks!
Jim

Hi Jim,

If they are Marzocchi 35mm 1974 era then check out my post on Marzocchi, I have a pic with the damper valve in the order it was removed.

Regards,

Alex

Thanks Alex, but they are the standard 31.5mm type from a mid ‘60s narrow case. The service manual doesn’t show which way they go.

Hi Jim
These are pictures I took when I stripped my N/C forks quite awhile back, and they have yet to be re-assembled, but I can't think I would not have laid them out in the correct sequence.
Hope this helps.

Yes sir. Confirms what I thought.

I think I made a picture like this when I took them apart several years ago, but I can’t seem to find it.

Thanks for posting these Brian!