oil filters for narrowcase singles
Posted: Sun Nov 25, 2012 9:41 pm
by ajleone
Folks,
Has anyone ever separated the lug nut end from the oil filter tube ? I have what appears to be a nice oil filter the lug end is been play with, quite a bit and I would like to use the filter, but would replace the end ? Is this possible ? Any ideas who might hvae some parts ?
Tony
IMG_2074.JPG
IMG_2073.JPG
Re: oil filters for narrowcase singles
Posted: Mon Nov 26, 2012 1:15 am
by gregwils
I took a quick look at an extra I had. It's probably possible with adequate care and patience to reuse just the filter, but that doesn't mean it will be easy. First you will need to find an M22 (or M21) bolt with a 1.5 pitch, not very common to say the least. You'll need to shorten it and attach the filter with near perfect alignment to the bolt. This all assumes you managed to remove the existing one cleanly. I would suggest looking for a used one on fleaBay.
Re: oil filters for narrowcase singles
Posted: Mon Nov 26, 2012 1:49 am
by graeme
Try these people,
Ther are very helpful, even when the post in another country stuffs up.
Might be better to buy a new one.
Graeme
Howard
Capo di tutti capo at
http://www.widecase.comSupreme Commander at
http://www.discovolantemoto.co.uk
Re: oil filters for narrowcase singles
Posted: Mon Nov 26, 2012 7:56 am
by jezza