Page 1 of 1
pic of m1 m2 hottie cam lobes side view
Posted: Thu Mar 29, 2012 6:37 pm
by Ducati Dude
.
.
does anyone have ?
thank you
Re: pic of m1 m2 hottie cam lobes side view
Posted: Thu Mar 29, 2012 7:05 pm
by DewCatTea-Bob
" does anyone have ? "
____ Maybe, but what is "m2" ?
__ How about YOU post a pic of whatever cam it is that YOU have ? _ Then I'll tell you what it is, or whatever.
Hopeful-Cheers,
-Bob
Re: pic of m1 m2 hottie cam lobes side view
Posted: Thu Mar 29, 2012 8:06 pm
by Rick
Mr Dude,
If you read through this topic:
viewtopic.php?f=3&t=913You'll see that's it's not hard to modify any 250 cam to fit a 200 head. You can order a 'hottie' cam from Megacycle and take it to any machine shop for the modification- probably less than $50.00 and you'll have your 'hottie' cam.
Plus, you won't need to ask anyone to tear an engine apart to provide photos that probably wouldn't have done much good anyway.
I expect that in maintaining your collection over the years you've developed a relationship with a machine shop- there may even be a shop at your museum.
I'm not volunteering to do this for you- any local machine shop can do it.
Rick
pic of m1 m2 m3 hottie cam lobes side view
Posted: Fri Mar 30, 2012 6:32 pm
by Ducati Dude
Hi Bob
NICE to hear from you after almost a YEAR !!!!!!!!!!!!!!!!!
M2 same as M3
We DO NOT have a cam to take pic of to post and send you
In fact we do not even have the motor anymore
HINT HINT HINT
Best to you and yours
DD # 4 and DD # 7
DewCatTea-Bob wrote:" does anyone have ? "
____ Maybe, but what is "m2" ?
__ How about YOU post a pic of whatever cam it is that YOU have ? _ Then I'll tell you what it is, or whatever.
Hopeful-Cheers,
-Bob
hottie cam conversion
Posted: Fri Mar 30, 2012 6:37 pm
by Ducati Dude
Hi Mr. Rick
So , when can we pick you up at the airport ?
HA HA
We will contact Mega today
Do YOU have an extra 250 hottie cam sos Mega can convert it ?
Ciao DD #3
Rick wrote:Mr Dude,
If you read through this topic:
viewtopic.php?f=3&t=913You'll see that's it's not hard to modify any 250 cam to fit a 200 head. You can order a 'hottie' cam from Megacycle and take it to any machine shop for the modification- probably less than $50.00 and you'll have your 'hottie' cam.
Plus, you won't need to ask anyone to tear an engine apart to provide photos that probably wouldn't have done much good anyway.
I expect that in maintaining your collection over the years you've developed a relationship with a machine shop- there may even be a shop at your museum.
I'm not volunteering to do this for you- any local machine shop can do it.
Rick
Re: pic of m1 m2 hottie cam lobes side view
Posted: Fri Mar 30, 2012 9:41 pm
by joe46ho
Oh' Lord....It's starting again....
Why would anyone need pictures of a cam, that fits an engine they no longer have, for a motorcycle that doesn't exist ??