Any ideas what bike this might belong to?
I'm also trying to identify this one:
Random carburettors
Moderator: ajleone
-
maserlin
- Posts: 13
- Joined: Tue Oct 09, 2012 1:03 pm
Random carburettors
You do not have the required permissions to view the files attached to this post.
Ducati 450 Desmo - RUNNING!
Ducati 250 Mk3 - TODO!
Ducati 250 Mk3 - TODO!
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Del. carburetor-models
" Any ideas what bike this might belong to? "
____ Yes,, it's likely from a 250-Sprint, or a Benelli horizontal-single.
Is it's size 24mm ?
" I'm also trying to identify this one: "
____ I don't know what the 22.5mm-SSI Del.carb is from but, another member has mentioned that carb.model in another thread, nearly a year ago.
Try searching: '22.5mm SSI Dellorto'.
I've only found this... viewtopic.php?f=3&t=828&p=5859&hilit=22.5mm+SSI+carb#p5859
Hopeful-Cheers,
-Bob
____ Yes,, it's likely from a 250-Sprint, or a Benelli horizontal-single.
Is it's size 24mm ?
" I'm also trying to identify this one: "
____ I don't know what the 22.5mm-SSI Del.carb is from but, another member has mentioned that carb.model in another thread, nearly a year ago.
Try searching: '22.5mm SSI Dellorto'.
I've only found this... viewtopic.php?f=3&t=828&p=5859&hilit=22.5mm+SSI+carb#p5859
Hopeful-Cheers,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
-
maserlin
- Posts: 13
- Joined: Tue Oct 09, 2012 1:03 pm
Re: Del. carburetor-models
DewCatTea-Bob wrote:" Any ideas what bike this might belong to? "
____ Yes,, it's likely from a 250-Sprint, or a Benelli horizontal-single.
Is it's size 24mm ?
-Bob
I'll measure it at the weekend!
That 125 engine is seriously pretty!
Ducati 450 Desmo - RUNNING!
Ducati 250 Mk3 - TODO!
Ducati 250 Mk3 - TODO!
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Del. carburetor-models
" I'll measure it "
____ It's 'size' should be stated just above where the bowl mounts to it.
__ If less than 24mm, then it's not from a 250-Sprint.
Duke-Cheers,
-Bob
____ It's 'size' should be stated just above where the bowl mounts to it.
__ If less than 24mm, then it's not from a 250-Sprint.
Duke-Cheers,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 31 guests